Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car

Mercedes W202
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of a run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance
      - 2.5.1. Engine and system of production of exhaust gases
         - Replacement of engine oil
   Discharge of engine oil
   Visual control of leak of oil
   Check of level of oil Check of a condition of a maple belt Replacement of spark plugs Check of electric connections Lubricant of a control system of a butterfly valve
         + Check of level of cooling liquid Conditioner: check of level of coolant Replacement of the fuel filter / filter of rough cleaning Replacement of a replaceable element of the vozdushky filter Check of system of production of exhaust gases
      + 2.5.2. Box predach/main transfer
      + 2.5.3. Peredny Bridge / Steering
      + 2.5.4. Brakes / tires
      + 2.5.5. Body / internal lighting
   + 2.6. Care of the car
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Towage of the car
   2.9. Raising of the car
   2.10. The tools used to maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries Check of level of oil



The engine should not spend oils more than 1,0 l for 1000 km of a run. The bigger expense is a sign of wear of maslootrazhatelny caps of cores of valves and / or piston rings or oil consolidations.

At measurement of level of oil the car has to stand on a horizontal surface.

The engine has to be heated-up up to the working temperature.

After a stop of the engine wait not less than 3 minutes in order that oil gathered in the oil pallet.

1. Extend the index of level of oil (1) and wipe it with a pure rag.
2. Enter a measuring core against the stop into the directing tube and again extend it. Level of oil has to be between both marking marks.


Add new oil only if the level of oil approaches the mark "min". Oil volume from "min" to the mark "max" makes about 2,0 l.

Oil is added in a lock (2) covers of a head of the block of cylinders. At a dolivka apply the corresponding grade of oil, do not apply oil additives.