Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of a run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance
      - 2.5.1. Engine and system of production of exhaust gases
         + 2.5.1.1. Replacement of engine oil
         2.5.1.2. Check of a condition of a maple belt
         2.5.1.3. Replacement of spark plugs
         2.5.1.4. Check of electric connections
         2.5.1.5. Lubricant of a control system of a butterfly valve
         + 2.5.1.6. Check of level of cooling liquid
         2.5.1.7. Conditioner: check of level of coolant
         2.5.1.8. Replacement of the fuel filter / filter of rough cleaning
         2.5.1.9. Replacement of a replaceable element of the vozdushky filter
         2.5.1.10. Check of system of production of exhaust gases
      + 2.5.2. Box predach/main transfer
      + 2.5.3. Peredny Bridge / Steering
      + 2.5.4. Brakes / tires
      + 2.5.5. Body / internal lighting
   + 2.6. Care of the car
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Towage of the car
   2.9. Raising of the car
   2.10. The tools used to maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries





2.5.1.7. Conditioner: check of level of coolant

GENERAL INFORMATION

Prevention

It is impossible to open a circulating contour of coolant in the conditioner. Coolant contains substances which in contact with skin can lead to a frostbite.


PERFORMANCE ORDER
1. Clear the index of the level (shooter) on a tank with liquid.
2. Remove the shtekkerny socket from the thermal sensor (the cooling means / conditioning) (B10/8). Zashuntiruyte of connection by an auxiliary wire.
3. Start the engine and leave it to idle.
4. Turn on the conditioner and install it in situation "Defrosting" or "Drying by Air".
5. Remove a crossing point on the shtekerny socket and at the same time observe through a peephole on a tank with coolant. Quickly after turning on of the electromagnetic connecting coupling coolant has to rise and then proceed without bubbles. In this case coolant can be we do not see any more.
6. Pull the shtekkerny socket over the thermal sensor.

Prevention

At more high temperatures of the environment (over +35 °C) even at normal amount of the filling coolant foam and a few bubbles can appear. At leak of coolant or estimated leakage of system the correct amount of the filling coolant can be defined only by full depletion and new filling of system (work in auto repair shop).