Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of a run
   2.3. Every 2 year
   2.4. Every 3-4 year
   - 2.5. Works on maintenance
      - 2.5.1. Engine and system of production of exhaust gases
         - 2.5.1.1. Replacement of engine oil
            2.5.1.1.1. Discharge of engine oil
            2.5.1.1.2. Visual control of leak of oil
            2.5.1.1.3. Check of level of oil
         2.5.1.2. Check of a condition of a maple belt
         2.5.1.3. Replacement of spark plugs
         2.5.1.4. Check of electric connections
         2.5.1.5. Lubricant of a control system of a butterfly valve
         + 2.5.1.6. Check of level of cooling liquid
         2.5.1.7. Conditioner: check of level of coolant
         2.5.1.8. Replacement of the fuel filter / filter of rough cleaning
         2.5.1.9. Replacement of a replaceable element of the vozdushky filter
         2.5.1.10. Check of system of production of exhaust gases
      + 2.5.2. Box predach/main transfer
      + 2.5.3. Peredny Bridge / Steering
      + 2.5.4. Brakes / tires
      + 2.5.5. Body / internal lighting
   + 2.6. Care of the car
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Towage of the car
   2.9. Raising of the car
   2.10. The tools used to maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries





2.5.1.1.2. Visual control of leak of oil

PERFORMANCE ORDER
1. At the oiled engine at a high consumption of oil check where oil follows.
1a. Open a cover of an oil-filling opening and check consolidation for lack of porosity or damage.
1b. System of ventilation of a case: for example, a ventilating hose from a cover of a head of the block of cylinders to the case of a butterfly valve.
1 century. Consolidation of a cover of a head of the block of cylinders.
1 g. Consolidation of a head of the block of cylinders.
1. Consolidation of an oil filter: cover of an oil filter.
1e. Carving stopper of a masloslivny opening (sealing ring).
1zh. Consolidation of the oil pallet.
1z. Epiploons in front of and behind a distributive and bent shaft.
2. As in the presence of thinnesses in most cases oil is distributed on rather big surface of the engine, it is, at first sight, impossible to define oil leak. By search it is expedient to arrive as follows.
2a. Wash out the engine. For this purpose sprinkle the engine standard low-temperature cleaner and after short-term endurance wash out a water stream. Previously close the generator a plastic cap.
2b. Pollinate lime or powder of talc of the place of separation and consolidation outside on the engine.
2 century. Check oil level, if necessary add oil.
2 g. Carry out a trial trip. As oil at the hot engine becomes liquid and thanks to it will appear in points of leaks rather, this trial trip should be carried out on a piece about 30 km on the high-speed highway.
2. Then survey the engine a lighting lamp, localize the leaky place and eliminate defect.