Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
- 2. Maintenance
   + 2.1.1. Engine
   2.2. In addition through each 60 000 km of a run
   2.3. Every 2 year
   2.4. Every 3-4 year
   + 2.5. Works on maintenance
   + 2.6. Care of the car
   2.7. Start of the engine from the auxiliary accumulator
   2.8. Towage of the car
   2.9. Raising of the car
   2.10. The tools used to maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries





2.10. The tools used to maintenance

GENERAL INFORMATION


Costs of acquisition of the tool completely come true the volume of repair work which should be carried out on the Mercedes car. Besides the main equipment anyway we recommend to get a dynamometer wrench. The good and reliable tool is offered by Hazet. Tools with number of the order of Hazet are given in the table.

No. on rice.
Tool No. of HAZET
1
Shock (pulse) винтоверт 2272
3
Screw-drivers for various screws 793/3
4
The stand for check of operation of the Bosch engine
5
Stroboscope for definition of the moment of ignition of Bosch 1)
6
Diode control lamp
7
Measuring lamellar probe of 0,05-1,0 mm 2147
8
Pincers for removal of coupling springs of brake shoes 797
9
Shock exhaust pincers for removal of maslootrazhatelny caps 791-2
10
Rotary core for capture of safety locks of system of injection 4519-1
11
Chain cutting torch of the final pipeline
12
Accumulator денсиметр with a pipette 802-1
13
Pneumatic adapter for replacement of maslootrazhatelny caps 3428
14
The hydraulic device for disembarkation of nuts 846-22
15
Key of an oil filter 2172
17
Set of face keys 2100/7R
18
Brush for cleaning of poles and clips of the rechargeable battery 802-4
19
The holder for grinding in of valves 795
20
Magnetic finder 1976
21
Dynamometer wrench of 20-200 N. of m 6122-1CT
22
Shaber for removal of the remains of consolidation on a head of the block of cylinders 824
23
File for a support of the disk wheel brake mechanism 1968-1
24
The pivot axle of the traction coupling device, diameter is 15–19 mm 2173/1
25
Stripper of tips of cross steering draft 779
26
Pincers for removal of isolation from wires of 1862
27
Brass дорн
28
Brush from a steel wire for cleaning of a support of the disk wheel brake mechanism 1968
31
Shplintova the leading element for safety pins of 748 Lgb-4
32
Shplintova the leading element for hollow pins 748-Lgb-6
33
Kompressometr
34
Square adapter with 1/2" on 1/4" 958-2
36
The device for boring of expansion bolts 845
37
The two-way open closed wrench for cap nuts of the pipeline of the brake drive 612S 9 x 11

38
The two-way open closed wrench for extraction of contact safety locks of system of injection of fuel 6128 12 x 14
39
Shock stripper of levers of a screen wiper etc. 1966-5
is not present on rice.
Candle key from a guide of 767 A Mgt-1

1) Only for petrol engines