Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car

Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
- 14. Electric equipment
   14.1.2. Measuring devices
   14.1.3. Technology of measurements
   14.1.4. Checks of electric equipment
   14.1.5. Sound signal
   14.1.6. Replacements of safety locks
   + 14.1.7. Rechargeable battery
   + 14.1.8. Generator
   + 14.1.9. Starter
   14.1.10. Traction relay
   - 14.1.11. System of lighting Lamps of passing, driving and fog beam A lamp in a forward lamp of the index of turn A lamp in a back lamp A lamp in a lamp of illumination of registration plate A plafond in salon Lamp of the index of turn
      + Headlight Back lamp
   14.1.12. Devices
   14.1.13. Dashboard
   14.1.14. Glow lamps on the dashboard
   14.1.15. Light switch
   14.1.16. Radio receiver
   + 14.1.17. Antenna
   14.1.18. Loudspeakers
   + 14.1.19. Rubber brushes of screen wipers
   14.1.20. Windscreen washer jets
   14.1.21. The washing nozzles of headlights
   14.1.22. Screen wiper and its engine
   14.1.23. Protect the car
   14.1.24. Anticreeping "immunodeficiency"
   14.1.25. Why headlights grow dull
   14.1.26. Galogenka
+ 14.2. Electrical circuitries Lamps of passing, driving and fog beam


1. Barrier бюгель (collar)
2. Case cover
3. The plug for passing beam
4. The plug for driving beam
5. Boss of a lamp of parking fire
6. The plug for anticreeping light
7. Glow lamp of passing beam
8. Glow lamp of driving beam
9. Glow lamp of parking light
10. Glow lamp of fog light
11. A clip for a lamp of passing beam
12. A clip for a lamp of driving beam
13. A clip for a lamp of fog light


Switch off the switch of the corresponding lamp.

1. Open an engine cowl.
2. Cast away outside a wire bracket (1) and remove cases (2).
3. Remove the shtekkerny socket from the corresponding lamp.
4. Lamps of passing, driving and fog beam: unhook clips and take a lamp. Insert a new lamp so that ledges entered the corresponding cuts in the case. Insert a lamp for a fog light together with the wire going to the car.
5. Parking light (front position lamp): remove the lamp holder together with the glow lamp. Take a lamp from the holder and replace it. At insertion record the lamp holder.
6. Spread the protection cover and record the supporting bracket.