Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
- 14. Electric equipment
   14.1.2. Measuring devices
   14.1.3. Technology of measurements
   14.1.4. Checks of electric equipment
   14.1.5. Sound signal
   14.1.6. Replacements of safety locks
   + 14.1.7. Rechargeable battery
   + 14.1.8. Generator
   + 14.1.9. Starter
   14.1.10. Traction relay
   + 14.1.11. System of lighting
   14.1.12. Devices
   14.1.13. Dashboard
   14.1.14. Glow lamps on the dashboard
   14.1.15. Light switch
   14.1.16. Radio receiver
   + 14.1.17. Antenna
   14.1.18. Loudspeakers
   + 14.1.19. Rubber brushes of screen wipers
   14.1.20. Windscreen washer jets
   14.1.21. The washing nozzles of headlights
   14.1.22. Screen wiper and its engine
   14.1.23. Protect the car
   14.1.24. Anticreeping "immunodeficiency"
   14.1.25. Why headlights grow dull
   14.1.26. Galogenka
+ 14.2. Electrical circuitries





порно из чата, киска.

14.1.15. Light switch

GENERAL INFORMATION

50. Handle of management
51. Glow lamp
52. Nut
53. Protection cover
54. Regulator of a tilt angle of an optical axis of headlights
55. Shtekkerny socket
S. Light switch

Removal

PERFORMANCE ORDER
1. Disconnect a weight wire from the plug of the rechargeable battery.
Prevention

At the same time the anticreeping code of radio is erased.


2. Remove the protection cover under a guard of devices.
3. Pull down a hand the handle of management to light switch.
4. Extend the glow lamp (51).
5. Unscrew a nut (52) and remove the protection cover (53).
6. Disconnect the regulator of a tilt angle of an optical axis of headlights (54) from spring clips.
7. Turn the switch of light (S1) to the left and Take it down. At installation pay attention to the correct landing of lock ledges.

Installation

Installation is made in the sequence, the return to removal.