Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
- 13. Body
   13.2. Forward door
   13.3. Back door
   13.4. Handle of a forward door
   13.5. Handle of a back door
   13.6. Door lock
   13.7. Internal covering of doors
   13.8. Forward window regulator
   13.9. Glass of a forward window
   13:10. Back window regulator
   13:11. Glass of a forward door
   13:12. Window regulator engine
   13:13. Glove boxing
   13:14. Gear shifting handle sheeting
   13:15. Forward ashtray
   13:16. Average console
   13:17. Heating service panel
   13:18. Internal covering of the A-rack
   13:19. Internal covering of the S-rack
   13:20. Front seat
   13:21. Back seat
   + 13:22. Central lock
   13:23. External mirror / glass of a mirror
   13:24. A covering under the dashboard
   13:25. Front bumper
   13:26. Rear bumper
   13:27. Internal wing of the car
   13:28. Car wing
   13:29. Lattice Mercedes radiator / emblem
   13:30. Draft of a cowl of the engine
   13:31. A covering under a windshield
   13:32. The air supply device for heating of salon
   13:33. Catchment basin
   13:34. Paint and varnish covering
   13:35. Metal corrosion
   13:36. Automake-up
   13:37. What creaks?
   13:38. Hatch
+ 14. Electric equipment
+ 14.2. Electrical circuitries





13.9. Glass of a forward window

Adjustment

PERFORMANCE ORDER
1. Check the assembly provision of glass at its easy opening. The gap from above has to be uniform, from below glass has to enter the directing tire, otherwise adjust.
2. Remove an internal covering of a door.
3. Carefully remove the pressurizing film in the lower area.
Prevention

The film is easily torn.


4. Lower glass of a door window down while the bolt is in an assembly opening. Weaken a bolt, without turning off it.
5. Insert from above glass into the back tire of a window, at the same time correct glass down or up, tighten a bolt.
6. By means of the handle, lowering and lifting glass, check ease of its movement.
7. Attach the pressurizing film without folds. Attention: the film should not be damaged and has to provide faultless tightness.
8. Establish an internal covering of a door.