Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
- 13. Body
   13.2. Forward door
   13.3. Back door
   13.4. Handle of a forward door
   13.5. Handle of a back door
   13.6. Door lock
   13.7. Internal covering of doors
   13.8. Forward window regulator
   13.9. Glass of a forward window
   13:10. Back window regulator
   13:11. Glass of a forward door
   13:12. Window regulator engine
   13:13. Glove boxing
   13:14. Gear shifting handle sheeting
   13:15. Forward ashtray
   13:16. Average console
   13:17. Heating service panel
   13:18. Internal covering of the A-rack
   13:19. Internal covering of the S-rack
   13:20. Front seat
   13:21. Back seat
   + 13:22. Central lock
   13:23. External mirror / glass of a mirror
   13:24. A covering under the dashboard
   13:25. Front bumper
   13:26. Rear bumper
   13:27. Internal wing of the car
   13:28. Car wing
   13:29. Lattice Mercedes radiator / emblem
   13:30. Draft of a cowl of the engine
   13:31. A covering under a windshield
   13:32. The air supply device for heating of salon
   13:33. Catchment basin
   13:34. Paint and varnish covering
   13:35. Metal corrosion
   13:36. Automake-up
   13:37. What creaks?
   13:38. Hatch
+ 14. Electric equipment
+ 14.2. Electrical circuitries





13.5. Handle of a back door

GENERAL INFORMATION

The handle of a back door on a design is similar to the handle of a forward door, first of all distinctions are provided below.

Removal

PERFORMANCE ORDER
1. Get a door sealant at height of the door lock from a door groove.
2. Unscrew on 5 turns a bolt with an internal hexagon (shooter) a face key of 3 mm in size through an opening at doors. The bolt with an internal hexagon is available through an opening (10) on the forward party of a door.
3. Extend a back guide of a door at first back, and then outside.
4. Extend the door handle with laying from a basic bracket back. The basic bracket, if necessary, can be removed from the inside of a door. For this purpose, however, it is necessary to remove a door covering.
5. Remove rubber laying of the handle of a door.

Installation

PERFORMANCE ORDER
1. Insert the door handle with laying and at the same time enter into the operating lever of the door lock.
2. Establish a back guide.
3. Fix the door lock by a bolt with an internal hexagon.
4. Establish a sealant of a door and check work of a door.