Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
- 13. Body
   13.2. Forward door
   13.3. Back door
   13.4. Handle of a forward door
   13.5. Handle of a back door
   13.6. Door lock
   13.7. Internal covering of doors
   13.8. Forward window regulator
   13.9. Glass of a forward window
   13:10. Back window regulator
   13:11. Glass of a forward door
   13:12. Window regulator engine
   13:13. Glove boxing
   13:14. Gear shifting handle sheeting
   13:15. Forward ashtray
   13:16. Average console
   13:17. Heating service panel
   13:18. Internal covering of the A-rack
   13:19. Internal covering of the S-rack
   13:20. Front seat
   13:21. Back seat
   + 13:22. Central lock
   13:23. External mirror / glass of a mirror
   13:24. A covering under the dashboard
   13:25. Front bumper
   13:26. Rear bumper
   13:27. Internal wing of the car
   13:28. Car wing
   13:29. Lattice Mercedes radiator / emblem
   13:30. Draft of a cowl of the engine
   13:31. A covering under a windshield
   13:32. The air supply device for heating of salon
   13:33. Catchment basin
   13:34. Paint and varnish covering
   13:35. Metal corrosion
   13:36. Automake-up
   13:37. What creaks?
   13:38. Hatch
+ 14. Electric equipment
+ 14.2. Electrical circuitries





13:19. Internal covering of the S-rack

GENERAL INFORMATION

1. Covering
2. Hooks
3. The holding clips
4. Plug-in clip
5. The shelf for hats
6. Bolt
7. Detail of fastening of a seat belt

Removal

PERFORMANCE ORDER
1. Disconnect regional protection in the field of an oblivka (1).
2. Wring out the plastic clip two hooks (3) from the holding clips.
3. Wring out a covering (1) from the back top holding clips for what press a covering to the middle.
4. Take a covering (1) from a plug-in clip (4) and uvulas (arrow) in a regiment for hats forward. If dismantle of all covering completely is necessary, in addition remove a back bench.
5. Unscrew a bolt (6) from a detail of fastening of a back seat belt (7) and extend a belt from a covering.

Installation

PERFORMANCE ORDER
1. Lay a tape of a seat belt and tighten with the moment 35 N. of m a bolt in an element of fastening of a belt.
2. Further installation happens as it should be, the return to removal.