Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
- 12. Brake system
   12.2. Anti-blocking system – ABS
   12.3. The additional equipment – the ASR system
   12.4. Specifications of the brake system
   12.5. Overlays of front brake shoes
   + 12.6. Overlays of back disk brakes
   12.7. Support
   12.8. Forward brake disk
   12.9. Back brake disk
   12:10. Brake fluid
   12:11. Removal of air from the brake system
   12:12. Brake pipelines / hoses
   12:13. Replacement of brake highways
   12:14. Brake shoes of the parking brake
   12:15. Adjustment of the parking brake
   12:16. Stoplight switch
   12:17. Diagnostics of malfunctions of brakes
   + 12:18. Wheels and tires
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries





12:16. Stoplight switch

GENERAL INFORMATION

The switch of a stoplight is from above a brake pedal at the pedal block.

24. Brake pedal
S9. Stoplight switch

Removal

PERFORMANCE ORDER
1. Switch off ignition.
2. Remove the left covering under the dashboard.
3. Disconnect the wire plug from the stoplight switch.
4. Press a clamp (S9b), turn the switch and take.

Installation

PERFORMANCE ORDER
1. Extend against the stop a pin of switching (S9a) on the new switch. At the same time the maximum way of a pin turns out (and).
2. Completely press a brake pedal. Install the switch and turn so that the clamp (S9b) entered gearing.
3. Release a brake pedal, at the same time the way of a pin of the switch self-regulates.
4. Put on the wire plug the stoplight switch.
5. Establish a covering under the dashboard.
6. Check whether stoplights light up by small pressing a brake pedal.
Prevention

Check the stoplight switch.