Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
+ 2. Maintenance
- 3. Engines
   3.1.2. Identification number
   + 3.1.3. Engine
   3.1.4. Cars with the conditioner
   3.1.5. Lower cover of a motor compartment
   3.1.6. Covers of cast openings
   3.1.7. Natyazhitel of a chain
   + 3.1.8. Cover of a head of the block of cylinders
   + 3.1.9. Head of the block of cylinders
   + 3.1.10. Camshafts
   3.1.11. Hydraulic dish-shaped pushers
   3.1.12. Maslootrazhatelny caps
   3.1.13. Valves
   3.1.14. The directing valves
   3.1.15. Saddles of valves in a head of the block of cylinders
   3.1.16. Compression
   + 3.1.17. Maple belt
   3.1.18. Diagnostics of malfunctions (DB)
   3.1.19. General comments
   3.1.20. Repair work without dismantle of the engine
   + 3.1.21. Capital repairs of the engine
   - 3.2. Diesel Engine (DE)
      - 3.2.2. Engine
         3.2.2.2. Installation
         3.2.2.3. Ventilation of the engine
         3.2.2.4. Functioning
   3.2.3. Cars with the conditioner
   3.2.4. Lower cover of a motor compartment
   3.2.5. Covers of cast openings
   3.2.6. Natyazhitel of a chain
   + 3.2.7. Camshaft
   + 3.2.8. Head of the block of cylinders
   + 3.2.9. Maslootrazhatelny caps
   3.2.10. Cover of a head of the block of cylinders (2,2 / 2,5 l)
   3.2.11. Hydraulic dish-shaped pushers
   3.2.12. Valves
   3.2.13. The directing valves
   3.2.14. Saddles of valves in a head of the block of cylinders
   3.2.15. Head of the block of cylinders and motor block
   3.2.16. Compression
   3.2.17. Maple ridge belt
   3.2.18. The pulling device of a maple ridge belt
   3.2.19. Diagnostics of malfunctions (DD)
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries





Подгонка одежды, работа с давальческим сырьем, корпоративная одежда, фирменная одежда под заказ.

3.2.2.4. Functioning

GENERAL INFORMATION

126. Oil separator
127. Recirculation pipe
140. Distributive pipe
141. Valve of adjustment of pressure
and. Air vent with a diameter of 3 mm
A. Produvnye gases
B. Fresh air

Hot gases direct through an oil separator (126) in a cover of a head of the block of cylinders and via the pipeline (140) in the soaking-up branch pipes. In an oil separator (126) oil is filtered and flows through a recirculation pipe (127) back to a head of the block of cylinders.

The valve of adjustment of pressure in a cover of a head of the block of cylinders prevents emergence in the engine of too high depression.

For ventilation of space of a membrane the air vent (shooter) is provided in the valve of adjustment of pressure in a cover of a head of the block of cylinders. It should not be littered with dirt or preservatives.