Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
- 10. Running gear
   + 10.1.2. Shock-absorbers
   + 10.1.3. Forward springs
   10.1.4. Stabilizer of cross stability
   + 10.2. Zadny Bridge
   10.3. Why the shock-absorber is necessary
   10.4. Types of shock-absorbers
   10.5. Additional protection of spherical hinges of steering drafts
   10.6. "Cunning" bolts and nuts
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries






10.1.4. Stabilizer of cross stability

Removal

PERFORMANCE ORDER
1. Put the car in front on supports.
2. Unscrew on both sides of a support (22b) on the bottom and on suspension bracket levers. Previously mark with paint the provision of collars for installation.
3. Remove the stabilizer together with rubber support.

Installation

PERFORMANCE ORDER
1. Before installation check rubber support, porous or cracked - replace.
2. Put collars of rubber support in the same position, as well as before removal, and fix new самоконтрящимися by bolts (22s) with m 20 N.' moment.