Mercedes of the S-class W202

1993-2000 of release

Repair and operation of the car



Mercedes W202
+ 1.2. General information
+ 2. Maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
- 9. Transmission
   - 9.1.2. Check of thickness of a clutch plate in the mounted state
      9.1.3. Coupling check
      9.1.4. Coupling switching off coupling bearing
      9.1.5. Removal of air from a control system of coupling
      9.1.6. Probuksovochka
      9.1.7. Diagnostics of malfunctions of system of coupling
   + 9.2. Mechanical and automatic boxes of gear shifting
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries






9.1.2. Check of thickness of a clutch plate in the mounted state

GENERAL INFORMATION

Coupling is self-regulating system and does not demand maintenance therefore it is impossible to determine wear of a clutch plate by a coupling pedal side play. To check clutch plate thickness in the mounted state, the special control template which can be made independently is required.

PERFORMANCE ORDER
1. Make a control template of sheet metal 0,8 mm thick in scale 1:1.
2. Raise the car.
3. Insert a template (4) on the distributing device of coupling against the stop into a groove of a plastic insert.
4. If the cut-out marks of a template (shooter) drown behind a flange of the distributive cylinder of coupling, then the clutch plate still has sufficient thickness.
5. If the cut-out marks remain visible though the template is inserted against the stop, then in this case the clutch plate already reached the limit of wear and has to be replaced.
6. Lower the car.