Mercedes of the S-class W202
1993-2000 of release
Repair and operation of the car
+ 1.2. General information
- 2. Maintenance
+ 2.1.1. Engine
2.2. In addition through each 60 000 km of a run
2.3. Every 2 year
2.4. Every 3-4 year
+ 2.5. Works on maintenance
- 2.6. Care of the car
2.6.2. Care of the painted surfaces
2.6.3. Care of plastic details
2.6.4. Care of glasses and rubber consolidations
2.6.5. Care of light-alloy wheels
2.6.6. Seat belts
2.6.7. Anticorrosive protection
2.6.8. Preservation of a motor compartment
2.6.9. Care of an upholstery of chairs
2.7. Start of the engine from the auxiliary accumulator
2.8. Towage of the car
2.9. Raising of the car
2.10. The tools used to maintenance
+ 3. Engines
+ 4. Lubrication system
+ 5. Cooling system
+ 6. Heating, ventilation
+ 7. System of ignition
+ 8. Fuel system
+ 9. Transmission
+ 10. Running gear
+ 11. Steering
+ 12. Brake system
+ 13. Body
+ 14. Electric equipment
+ 14.2. Electrical circuitries
Clean the vacuum cleaner an upholstery of pillows or clean it not too soft brush. At strong pollution use dry foam. Process fat and oil spots the cleaning gasoline. But it is impossible to pour cleaner directly on material, otherwise auras are inevitably formed. The spot is processed by circular wiping outside inside. In most cases other pollution can be removed with warm soap water.
At influence of strong sunshine and on the long parking close seats in order that they did not fade.
Slightly moisten a knitted or woolen rag with water and clear it a leather surface, without remoistening skin or seams. Then wipe the dried skin with a pure and soft rag.
Strongly polluted surface of skin can be cleared soft neutral detergent without bleach (two tablespoons on one liter of water) carefully remove Fat and oil spots without pressing by the tampon moistened in the cleaning gasoline.
The cleared (varnished) leather chairs for the purpose of care of them need to be processed also karneolovy oil in quality an anti-electrostatics. Before use well shake up this oil and put it with a thin layer a soft rag. After its absorption wipe skin with a pure and soft rag. This processing is recommended to be carried out at normal loading every six months.